Lightning Arrester

HS 100 Lightning Arresters

Approx Price: Rs 3,200 / Unit 
Product Details:
  • Lifetime: min. 100 000 h
  • Method of assembly: DIN rail 35 mm
  • Model: HS 100
  • Arrester Type: Station Type, Intermediate Type, Distribution Type
  • Brand: Hakel
  • Weight: 360g

HS100 and JK110 are the total current spark gaps type 1 according to EN 61643-11 and IEC 61643-11. These are recommended for use in the Lightning Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305), where they provide the equipotential bonding and discharge of both, the lightning current and the switching surge, which are generated in power supply systems entering the building. The lightning arresters are constructed as the encapsulated, non-exhaust, multiple spark gaps, which do not have any special requirements for installation in the main switchboards in terms of the gas exhaustion generated during the passage of the lightning current.

 

They are intended for use in TN-S and TT systems. HS100 and JK110 are to be installed only between N and PE in modifications of 3+1 or 1+1.

ESE Lightning Arrester

Approx Price: Rs 90,000 / Piece 
Product Details:
  • Brand: LPI
  • Arrester Type: Station Type, Intermediate Type, Distribution Type
  • Input Frequency (Hz): 50/60 Hz

ESE Lightning Arrester the LPI Stormaster (Early Streamer Emission) range of terminals provides a safe and efficient system for the protection of your facility from direct lightning strikes. The LPI Stormaster ESE terminal captures the lightning energy at a preferred point.

Working of ESE Lightning Arrester:
  • The Stormaster ESE air terminal uses the naturally occurring electrical field to complete the timely release of an upwardstreamer.
  • This process provides for a safe and efficient method of controlling dangerous lightning energy at a preferred point.
  • As a thunderstorm gathers overhead, the ambient electrical field surrounding the Stormaster ESE begins to rise involtage.
  • Upon the approach of a downward leader towards the protected area, there is a rapid increase in the electric field which initiates the triggering of an upward streamer from the Stormaster ESE terminal.
  • The early initiation allows for a larger or enhanced area of protection to be provided by the Stormaster ESE in comparison to a conventional rod, in accordance with NF C 17-102 (2011).
  • With the release of the upward streamer from the finial tip earlier than other competing structural points, the Stormaster ESE terminal becomes a preferred point for the capture of the lightning discharge within the protected area.

Certified Performance:
  • As one of the leading companies in the field of lighting protection, LPI has invested heavily in field and laboratorytesting as part of its ongoing commitment to research and development.
  • Throughout the product development of the Stormaster ESE the proto-type models were subjected to intense testing under high voltage conditions.
  • Following further refinements the Stormaster terminals were subjected to final testing by an independently accredited test laboratory which completed testing in full compliance with the French National Standard NF C 17-102 (2011).
  • The final testing of Stormaster ESE terminals showed effective performance as defined in this Standard. LPI Stormaster ESE lightning air terminal is tested & certified from CPRI (Central Power Research Institute),Bangalore, Government of India.

    Additional Information:
    • Item Code: Stormaster

    ESE Lightning Arrester

    Approx Price: Rs 90,000 / Unit 
    Product Details:
    • Material : Pure Copper or Copper Coated Stainless Steel
    • Current gradient : less than 5KA
    • Grounding resistance: less than 10 ohm
    • Resistible wind speed: over 50m/s

    The protection radius (Rp) of a Stormaster ESE terminal is calculated using the following formula as defined in NF C 17-102 (September 2011), namely:
    Rp(h) = √2rh − h2 + (2r + ) for h ≥ 5 m and Rp = h x Rp5 / 5 for 2 ≤ h < 5 m where h = Stormaster height relative to the area being protected (m) Rp5 = value of Rp from Eqn. (1) when h = 5 m r = 20 m for protection level I (Very High protection) 30 m for protection level II (High protection) 45 m for protection level III (Medium protection) 60 m for protection level IV (Standard protection) and = Stormaster time and height advantage according to the Stormaster model installed: Choices: Stormaster ESE 15 SS: = 15 μs Stormaster ESE 30 SS: = 30 μs Stormaster ESE 50 SS: = 50 μs Stormaster ESE 60 SS: = 60 μs

    SPC PV 600 DS Lightning Arresters

    Approx Price: Rs 3,900 / Unit 
    Product Details:
    • Series: SPC PV 600 DS
    • Brand: Hakel
    • Color: Blue

    PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building. The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.
    The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305, e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

    Function of remote monitor terminals:
    • When the PIV DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

    HS 50 -50 Lighting Arrester

    Approx Price: Rs 3,500 / Unit 
    Minimum Order Quantity: 1 Unit
    Product Details:
    • Highest continuous operating voltage U C: 440 IN
    • Max. impulse current (10/350) I imp: 50 kA
    • Voltage protection level U p: Less than 2 kV
    • Maximum foreclosure: 500 AgL / gG
    • Classification: Type B, Type C, Type D
    • Poles Number: 1 Pole, 1pole+N, 3 Pole, 3 Pole+N
    • Brand: Hakel

    The HS 50 -50 Lighting Arrester is designed for special installations in industrial buildings where a permanent operating voltage with a maximum value of 440 V AC is required. It is installed in the main switchboards of large industrial buildings and where the direct lightning strike is in danger.

    SPC PV 1000 DS Lightning Arresters

    Approx Price: Rs 10,200 / Unit 
    Product Details:
    • Lifetime: min.100 000 h
    • Degree of protection of enclosure: IP 20
    • Brand: Hakel
    • Color: Blue
    • Weight: 900 g

    SPC PV 1000 DS Lightning Arresters type 1+2 according to EN 61643-11. It is designed for protection of positive and negative busbars of photovoltaic systems against the surge effects. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0-1 (according to IEC 1312-1and EN 62305). Particular varistor sectors connected between terminals L+, L- and PE are equipped with fitted internal disconnectors which are activated when varistors fail (overheat). Failure indication of these disconnectors is partly mechanical (by red signaling target) and partly remote monitoring (by potential free switching contacts).

    Function of remote monitor terminals:
    • When the SPC PV DS is operating correctly, the terminations 1-2 are connected to normally closed contacts, 2-3 are normally open. If the internal varistor component is damaged as a result of thermal overloading, terminations 1-2 will then be open and 2-3 closed.

    Copper Lightning Arrester

    Approx Price: Rs 3,500 / Unit 
    Product Details:
    • Phase: Single Phase
    • Number Of Poles: 4.0
    • Class: B

      Our organizations have successfully expanding its business in the market by offering quality assured array of Copper Lightning Arrester.

        Lightning Arrestor

        Approx Price: Rs 90,000 / Unit 
        Product Details:
        • Uc: 120
        • Reated Voltage: 10kV
        • Housing Type: Polymer
        • Arrester Type: Intermediate Type
        • Material: Copper

        Hakel B100 Lightning Arrester

        Approx Price: Rs 3,900 / Unit 
        Product Details:
        • Model: Hakel B 100
        • System: TNS, TT, IT
        • Engagement: N / PE
        • Degree of protection: IP 20
        • Environment: Basic
        • The method of installation: DIN rail 35mm
        • Material of housing: SLOVAMID 6FRC2
        • Mass: 210 g
        • Brand: Hakel

        B25, B25M, B50, B80 and B100 are additive arresters Type 1 according to EN 61643-11. Designation M - specifies the type of construction with removable module. They are used in TN-S and TT, and at the boundaries of LPZ 0 and 1 It is installed between N and PE conductor in connections 3 +1 or 1 +1.

        Lightning Arresters for Offices and Family Houses

        Product Details:
        • Model: B 100
        • Arrester Type: Station Type, Intermediate Type, Distribution Type
        • Brand: Hakel

        Lightning Arresters for Offices and Family Houses this era brings the need to use a lot of equipment and appliances which already contain sensitive electronics. This makes life easier and allows more comfortable control of equipment. But many of us underestimate the danger of lightning stroke and overvoltage which can arise in a separate building. But even an object protected against direct lightning stroke can not ensure that induced surge will not damage sensitive electronics that controls the expensive appliances. Therefore, it is necessary to realize the need of protection of all sensitive electronic equipment used in offices and homes. HAKEL offers plenty of protection solutions against lightning and overvoltage. Lightning arresters PIVM12,5, which are installed in the main switchboard, then a surge protector, which is an integral part of every secondary switchboards PIIIM. For a complete security of all electronic devices it is necessary to install an arrester with high frequency filter as close as possible to the protected equipment. For these purposes, HAKEL offers an arrester with high-frequency filters PI-k (single-phase connection) and PI-3k (three-phase connection). When the propounded arresters are used properly we can exclude a break-down of purchased expensive sensitive equipment.

        TN-C

        TN-S

        Stormaster Lightning Arresters

        Approx Price: Rs 60,000 / Unit 
        Product Details:
        • Weight: 6.0kg
        • Material: Stainless Steel
        • Arrester Type: Station Type, Intermediate Type, Distribution Type

        The LPI Stormaster (Early Streamer Emission) range of terminals provides a safe and efficient system for the protection of your facility from direct lightning strikes. The LPI Stormaster ESE terminal captures the lightning energy at a preferred point.

        How does the LPI Stormaster ESE Terminal work?

        The Stormaster ESE air terminal uses the naturally occurring electrical field to complete the timely release of an upward streamer. This process provides for a safe and efficient method of controlling dangerous lightning energy at a preferred point.As a thunderstorm gathers overhead, the ambient electrical field surrounding the Stormaster ESE begins to rise in voltage. Upon the approach of a downward leader towards the protected area, there is a rapid increase in the electric field which initiates the triggering of an upward streamer from the Stormaster ESE terminal. The early initiaton allows for a larger or enhanced area of protection to be provided by the Stormaster ESE in comparison to a conventional rod, in accordance with NF C 17-102 (2011).

        With the release of the upward streamer from the finial tip earlier than other competing structural points, the Stormaster ESE terminal becomes a preferred point for the capture of the lightning discharge within the protected area.
        Certified Performance
        As one of the leading companies in the field of lightning protection, LPI has invested heavily in field and laboratory testing as part of its on-going commitment to research and development.Throughout the product development of the Stormaster ESE, the proto-type models were subjected to intense testing under high voltage conditions. Following further refinements, the Stormaster terminals were subjected to final testing by an independently accredited test laboratory which completed testing in full compliance with the French National Standard
        NF C 17-102 (2011). The final testing of Stormaster ESE terminals showed effective performance as defined in this Standard. Lightning Protection International Pty Ltd (LPI) is a fully Australian owned manufacturer and supplier of direct strike lightning protection, transient voltage surge suppression, and earthing / grounding solutions. For many years, LPI have been providing specialist lightning protection advice to customers in some of the most lightning prone areas of the world. Our personnel have extensive experience in risk management, system design, training, installation, certification, and commissioning of systems in a wide variety of industry groups. LPI maintains a third party Quality Management System to AS/NZS ISO 9001:2008. LPI’s range of products and services are exported from its head office and research facility (in Tasmania, Australia) and via regional offices worldwide. The company has been recognised within Australia for its outstanding export successes and has been awarded several prestigious export awards.

        Spark Gap Lightning Arrester

        Approx Price: Rs 3,500 / Unit 
        Product Details:
        • IP Rating: IP 20
        • Model: B 100
        • Arrester Type: Station Type, Intermediate Type, Distribution Type
        • Brand: Hakel

        HS100i is a Spark Gap Lightning Arrester 1 and class I according to EN 61643-11 and IEC 61643-1. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 to 2 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding in power supply systems entering the building. Type 1 lightning current arresters are used for lightning protection equipotential bonding to VDE 0185-305 (IEC 62305). The lightning current arresters are constructed as an encapsulated spark gap technology for installation in main switchboards. For TNS and TT systems it is necessary to combine these arresters with lightning current arrester HS50-50i which is recommended for equipotential bonding between N and PE. The main use of HS100i is in industrial installations such as transformers, the main switchboards of large industrial buildings and places with high risk of a direct lightning strike and with an external lightning protection of the highest class I to IV. It is also suitable for applications in unmeasured parts of electrical installation.

        PIIIM PV 1000 Lightning Arrester

        Approx Price: Rs 7,500 / Unit 
        Product Details:
        • Series: PIIIM PV 1000
        • Failure signalisation: Green - Ok / Red - Failure
        • Brand: Hakel

        PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building. The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.

        The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305, e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

        CSE Lightning Arresters

        Product Details:
        • Arrester Type: Station Type, Intermediate Type, Distribution Type
        • Brand: LPI
        • Lighting Protection Material: Copper

        PIV is Lightning Arresters type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building. The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE. The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305, e.g. residential houses with cable supply and sub distribution boards of big industrial structures.

        Lightning Arresters

        Approx Price: Rs 5,000 / Unit 
        Product Details:
        • Lifetime: min.100 000 h
        • Housing Type: Porcelain
        • Arrester Type: Station Type
        • Brand: Hakel
        • Weight: 900 g

        We are considered in the market to be one of the leading manufacturers and suppliers of this highly commendable range of Lightning Arrester.

        Hakel 30101 P-3k 400 Lightning Arresters

        Approx Price: Rs 3,600 / Unit 
        Product Details:
        • Housing Type: Porcelain
        • Arrester Type: Distribution Type
        • Brand: Hakel

        HakelZIL- HZ110 Lightning Arrester

        Approx Price: Rs 3,900 / Unit 
        Product Details:
        • Lifetime: min. 100 000 h
        • Method of assembly: holder SP50U10
        • Degree of protection of enclosure: IP00
        • Arrester Type: Station Type, Intermediate Type, Distribution Type
        • Weight: 1000 g

        HZ110 is a lightning arrester type 1 according to EN 61643-11 and IEC 61643-11. This is recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305), where it provides the equipotential bonding and discharge of both, the lightning current and the switching surge, which are generated in power supply systems entering the building. The lightning arrester is constructed as an encapsulated, non-exhaust, multiple spark gap, which does not have any special requirements for installation in the main switchboards in terms of the gas exhaustion generated during the passage of the lightning current. HZ110 is mainly intended for use in the power lines, which are operated as a system TN-C.


        Specifications:
        • PIV is lightning arrester type 1 according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305) for lightning current equipotential bonding and elimination of switching surges that originate in power supply systems entering the building.
        • The PIV is mainly intended for use in TNC systems. For TNS and TT systems it is necessary to combine these arresters with lightning arrester B25, B50 or B80 which are intended for equipotential bonding between N and PE.
        • The main use of PIV12,5 arrester is in structures of LPL III – IV according to EN 62305, e.g. residential houses with cable supply and subdistribution boards of big industrial structures.

        Lightning Arrester

        Approx Price: Rs 4,300 / Unit 
        Product Details:
        • Brand: Hakel
        • Material: Brass/Copper
        • Average discharge current : Less than 7KA
        • Grounding resistance : Less than 10 ohm
        • Resistible wind speed : Over 50m/s

        A structural Lightning Arrester is designed to protect the fabric of a structure and the lives of people inside by channelling lightning strike energy in a safe and controlled manner to the earth termination network. Hakel structural lightning protection employs air termination components and down conductors - air rods, bases, conductors and clips - to create an effective barrier against lightning. This approach follows the Faraday Cage principle of lightning protection, as advocated by the majority of national and international standards.

        Hakel has been manufacturing in accordance with international standards resulting in high quality of products and accurate production. Many standards related to earthing & lightning system are published for appropriate uses such as design, material specification, supply & installation.

        Lightning Arresters

        Approx Price: Rs 3,350 / Unit 
        Product Details:
        • Brand: LPI
        • Material: Copper
        • Arrester Type: Station Type, Intermediate Type, Distribution Type

        Specifications:
        • Type DTB 485 /R Number of protected pairs 1 Nominal voltage UN 6 V AC
        • Max. continuous operating voltage UC 7,2 V AC
        • Nominal current IN 0,1 A C2 Max. discharge current (8/20) Imax 2 kA Voltage protection level at In Up 15 V Voltage protection level at 1kV/μs UP 9 V Article number 41785

        ESE Lightning Arresters

        Product Details:
        • Arrester Type: Station Type, Intermediate Type, Distribution Type
        • Brand: LPI
        • Material: Copper, Copper-Clad Steel, Aluminum

        Lightning is one of the most devastating natural phenomena. There are many discharges during lightning storms and some of them can even reach hundreds of kilo amperes. The electrical discharges are a great hazard to people, animal, buildings and electronic equipments. The economic consequences of lightning are also very important; it can cause fire, stop production of a factory or interrupt critical processes. A direct lightning discharge lasts a very short time but the intensity is enough to provoke electrocution resulting in heart failure and causing burns of different degrees to the human beings. Lightning is a constant hazard where the buildings and equipments are becoming more complex and sensitive every day. One lightning strike discharge can damage the buildings and cause failures to the electronic devices inside the building and sometimes it may even results in fire and important economical losses. Until now, there is no device that can prevent lightning formation or lightning strikes. However, it is possible to create a path (divert) for the lightning discharge to the ground which will minimise the damage to the environment through a well designed Lightning Protection System (LPS). The lightning protection should be considered preferably during the initial stage of the building/structure design which has 4 basic objectives:
        During the formation of a cumulonimbus (cloud forming a towering mass with a flat base at fairly low altitude and often a flat top, as in thunderstorms), there is an increase of ionisation and a potential difference is generated between the thunder cloud and the ground, which gives rise to small discharges. As the electric field gains in strength, the descending leader breaks up the dielectric field in the air. Ultimately, this may break through the layers of dielectric field in the air and strike the surface via the upward propagating tracer from the surface. In normal conditions there is a balance between positive and negative charges in the atmosphere, where the ground is more negatively charged than the air and the elements placed on the ground. However, the formation of storm clouds creates a charge polarization; usually, the lower part of the cloud is charged negatively, inducing then a positive charge at the ground and other elements on it. The electric field at the atmosphere can reach kilovolts in a short span of time. When the electric field is high enough, the cloud starts discharging towards the ground. The path formed by this discharge is called “downward leader” and produces a very sharp variation of the electric field, causing the corona effect. One of these objects/structure will be forming the upward leader, which will move towards the downward leader thus forming the discharge path between the cloud and the ground.

        This object/structure will be hit with the lightning strike. The cloud charge will try to find the straightest/shortest path to earth and if this path is not controlled, damages can be severe. Electrical effects: Damages/destruction to the electrical & electronic equipments. Abnormal rise in ground voltage and surges/transients can damage all the equipment connected to the electrical network.

        Electrodynamical effects: Structure/building damages. The conductors & equipments which falls within the vicinity of the flow of lightning current are submitted to mechanical strengths due to the magnetic field originated. This may cause deformations and rupture the conductors & equipments.

        SPC PV 1000 Lightning Arrester

        Approx Price: Rs 2,500 / Unit 
        Minimum Order Quantity: 1 Unit
        Product Details:
        • Lifetime: min.100 000 h
        • Voltage Rating: 7kV-500kV
        • Brand: Hakel
        • Color: Blue
        • Weight: 900 g

        SPC PV-1000 is Lightning Arresters type 1+2 according to EN 61643-11. It is designed for protection of positive and negative busbars of photovoltaic systems against the surge effects. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0-1 (according to IEC 1312-1and EN 62305). Particular varistor sectors connected between terminals L+, L- and PE are equipped with fitted internal disconnectors which are activated when varistors fail (overheat). Failure indication of these disconnectors is partly mechanical (by red signaling target) and partly remote monitoring (by potential free switching contacts).

        SPC PV 600 DS Lightning Arresters

        Approx Price: Rs 11,200 / Set 
        Product Details:
        • Arrester Type: Station Type, Intermediate Type, Distribution Type
        • Brand: Hakel
        • Weight: 900 g

        Specifications:
        • Max. continuous operating voltage UC 255 V AC
        • Lightning impulse current (10/350) Iimp 110 kA Nominal impulse discharge current (8/20) In 50 kA Voltage protection level Up< 2,5 kV Max. back-up fuse 500 AgL/gG

        SPC PV 800 DS Lightning Arrester

        Approx Price: Rs 9,500 / Unit 
        Product Details:
        • Lifetime: min.100 000 h
        • Degree of protection of enclosure: IP20
        • Arrester Type: Intermediate Type, Distribution Type
        • Weight: 900 g

        SPC PV 800 DS is a lightning and surge arrester type 1+2 according to IEC EN 61643-11 and EN 50539-11. It is designed for protection of positive and negative busbars of photovoltaic systems against the surge effects. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0-2 (according to IEC EN 62305). Particular varistor sectors are equipped with internal disconnectors, which are activated when the varistors fail (overheat). Operational status indication of these disconnectors is partly mechanical (by exserted red signaling target in case of failure) and partly remote monitoring (by potential free change over contacts – only DS types).

        We are considered in the market to be one of the leading manufacturers and suppliers of this highly commendable range of Lightning Arrester.

        SPC PV 600 Lightning Arresters

        Approx Price: Rs 10,200 / Set 
        Product Details:
        • Voltage: 5kV-500kV
        • Series: SPC PV 600
        • Housing Type: Polymer
        • Brand: Hakel

        We are offering SPC PV 600 Lightning Arresters.
        Looking for Lightning Arrester ?
        Share Us:
        © Allied Power Solutions
        Desktop Site Back to top